The cutting method of different thickness glass What are the characteristics of the performance of the glass cutting disc

With the development of economy and the progress of science, the glass industry is also constantly improving. While researching and developing new varieties, it also strengthens the original glass types. Various types of deep-processed glass gradually replace ordinary flat glass and shine in their respective application fields. In order to be able to cut glass materials better and more conveniently, we need to have a certain understanding of various cutting methods, let me take a look.

1. Cutting method of different thickness glass

1. Cutting 2-3mm thick flat glass

For cutting 2-3m thick flat glass, you can use a 2mm×12mm thin wooden ruler. First measure the glass size and set the cutting size on the ruler. Consider leaving a 3mm gap and a 2mm knife edge. When cutting, the side with the size can be close to the side of the glass. The glass cutter is close to the other end of the ruler, and the end of the blade is grasped to draw straight back, and there should be no slight bending.

2. Cut 4-6mm thick glass

The method of cutting 4-6mm thick glass is roughly the same as the above, but because the glass is thicker, you must hold it accurately and hold it firmly when cutting, and the strength is even. Another cutting method is to use a 4mm×50mm ruler, and the glass cutter is close to the ruler to cut. When cutting, brush some kerosene on the cut in advance to make the cut easy to pull off after oil seepage.

3. Cutting 5-6mm thick large glass

The method of cutting 5-6mm thick bulk glass is the same as cutting with a 5mm×40mm ruler. However, large pieces of glass have a large area and cannot be cut while standing on the ground. Sometimes it is necessary to stand on the glass to cut. Before cutting, a flannel cloth must be placed on the worktable to make the glass evenly pressed. After cutting, both hands hold the required glass while downward If the board is off, you should not be careless, and cause the whole glass to break.

Second, what are the characteristics of the performance of glass cutting discs

1. Excellent grinding ability and high wear resistance ensure the blade has a long service life.

2. The high hardness of the bonding agent makes the blade have high rigidity, so that the blade will not be deformed during the cutting process, so as to ensure the perpendicularity of the cutting surface.

3. Through the fine adjustment of the concentration and particle size of the abrasive, it can have a good cutting efficiency under the premise of meeting the requirements of the cutting surface smoothness.

4. Advanced and scientific processing methods and strict process control ensure high accuracy of the shape and position of the blade.

5. The precise classification of the bonding agent meets the requirements of selecting special blades for processing different materials.

6. Suitable for single-chip use or multi-knife combined cutting.