Views: 0 Author: Site Editor Publish Time: 2020-06-30 Origin: Site
Sapphire windows are the same as windows of other materials. They are installed on instruments and equipment. Therefore, tolerance requirements must be put forward for processing sapphire windows.
Sapphire windows are the same as windows of other materials. They are installed on instruments and equipment. Therefore, tolerance requirements must be put forward for processing sapphire windows.
Let's discuss the processing tolerances of sapphire windows in several installation methods:
1. When the sapphire window is fixed by a flange, the general outline tolerance is required to be within +0/-0.1mm;
2. The sapphire window is used as a deep-water project, so the tolerance should be controlled within +0/-0.02mm;
3. For the stepped sapphire window, the matching requirements of the two stepped surfaces must be ensured. If there are two tolerance requirements, the minimum tolerance should be the basis.
Taixing Hechen Crystal Technology Co., Ltd. has extremely strict tolerance control on sapphire windows, and its products can meet most of the needs.
